Product Catalogue
Industrial metals · Next-day delivery · Free cutting
Filters
6082T6 Aluminium Square Bar
6082T6 Aluminium Square Bar - available in a range of sizes.
Acetal Round Bar
Acetal Copolymer is also know under the following trade or brand names Delrin, Tecaform, Ultraform, Celcon. As well as Acetal brand names it also know as the following industrial names including polyacetal, polyoxymethylene (POM), which is a high performance engineering polymer. Acetal is available as a homopolymer (POM-H) or copolymer (POM-C). Acetals have excellent mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals.
-1200.webp)
Acrylic (PMMA)
Acrylic has many different names including Poly(methyl methacrylate) (PMMA). It is also known as acrylic or acrylic glass as well as by many different trade names such as Plexiglas, Acrylite, Lucite, and Perspex to name just a few. Acrylic engineering plastic is transparent, lightweight and shatterproof. This type of engineered plastic is often used as an alternative or replacement to glass, as well as casting resin, a comment in inks and coatings, to name just a few.
Alloy Steel EN24T
High tensile alloy steel (850/1000 N/mm2). Offers good ductility and shock resistance. Supplied in the hardened and tempered T condition.
-1200.webp)
Aluminium 1000 Series (1050A)
The 1000 series alloys are the purest forms of aluminium, resistant to chemical attack and weathering, easily worked and welded, but have the lowest strength of the aluminium grades. The 1000 series are often used in chemical processing equipment and other applications where material purity is important. 1000 series aluminium is highly ductile and is used for metal pressings of all types. 1050A H14 Sheet specifically is known for its high purity (99.5% minimum aluminium) and excellent corrosion resistance.
Aluminium 6082 T6 & T651 Plate
6082 is a medium-strength structural aluminium alloy with good corrosion resistance and excellent machinability. We stock it as plate in both T6 and T651 temper. T6 is solution heat treated and artificially aged. T651 adds a controlled stretch after heat treatment to relieve internal stress, which leaves the plate flatter and far more stable once material is machined away from one face. That is why T651 is normally specified for tooling plate, jigs, fixtures and precision machined components, while T6 is used where the section is not heavily machined. Typical applications include machine parts, jigs and fixtures, tooling plate, structural sections and transport components. Cut to size on our saws with no minimum order, and full mill test certificates are available on request.
Aluminium Alloy 5083 - Marine Grade
Aluminium 5083 is known for exceptional performance in extreme environments. It is highly resistant to attack by both seawater and industrial chemical environments, making it the go-to choice for marine and offshore applications. 5083 has the highest strength of the non-heat treatable alloys, but is not recommended for use in temperatures in excess of 65°C. This is the alloy of choice for marine applications such as boat hulls, ship superstructures, and offshore platforms. -- KEY FEATURES -- ~ Exceptional corrosion resistance, especially in marine environments ~ Highest strength of non-heat treatable alloys ~ Excellent weldability ~ Retains strength in the 'as welded' condition ~ Good formability -- APPLICATIONS -- 5083 is typically used in: ~ Marine applications (hulls, decks, superstructures) ~ Offshore platforms and structures ~ Rail cars and road tankers ~ Cryogenic vessels and equipment ~ Pressure vessels ~ Drilling rigs ~ TV towers and masts -- TEMPER TYPES -- Common tempers include: H111 – Slightly strain-hardened during fabrication H116 – Strain-hardened with magnesium content 4% or more H321 – Stabilised after strain-hardening O – Annealed (soft) -- WELDABILITY -- 5083 has excellent weldability and is commonly welded with 5183, 5356, or 5556 filler alloys. The welded joint retains more of the parent metal strength than with most other aluminium alloys.
Aluminium Alloy 6061 - Aerospace Grade
Aluminium 6061 is one of the most widely used alloys in the 6000 series. It offers a good combination of strength, weldability, and corrosion resistance. Originally developed for aircraft structures, 6061 is now used in a wide variety of structural applications. 6061 has excellent mechanical properties when heat treated to the T6 temper and provides good workability in the annealed condition. It responds well to anodising for decorative and protective finishes. -- KEY FEATURES -- ~ Good strength-to-weight ratio ~ Excellent corrosion resistance ~ Good weldability and machinability ~ Responds well to anodising ~ Versatile alloy for many applications -- APPLICATIONS -- 6061 is typically used in: ~ Aircraft and aerospace components ~ Marine fittings and hardware ~ Bicycle frames and components ~ Structural components and frameworks ~ Automotive parts ~ Camera lenses and equipment ~ Electrical fittings and connectors ~ Couplings and brake pistons -- TEMPER TYPES -- Common tempers include: T6 – Solution heat treated and artificially aged T651 – T6 plus stress relieved by stretching T4 – Solution heat treated and naturally aged O – Annealed (soft) -- WELDABILITY -- 6061 has very good weldability. However, the heat-treated strength is reduced in the weld zone. For applications requiring full strength, post-weld heat treatment may be necessary. Gas: Good | Arc: Good | Resistance: Good
Aluminium Alloy 6063 Extrusion
Aluminium alloy 6063: a medium strength alloy, often referred to as an architectural alloy. It is used for intricate extrusions. 6063 has high corrosion resistance and a good surface finish, it is readily welded and can be anodised. Temper: Most commonly available as T6 temper, in the T4 condition it has good formability. Applications: - Architectural applications - Inteicate extrusions - Window and door frames - Shop fittings
Aluminium Alloy 6082 - T6~T651
Aluminium T6 6082 Alloy is a medium strength aluminium alloy that provides amazing corrosion resistance and is commonly used for application jobs that require light to medium strength. Aluminium 6082 is the strongest of the 6000 series alloys. Aluminium t-6 6082 aluminium alloys bring together great rust resistance and strength after many different types of heat treatments. It also remains strong and rust resistant after forming and welding. Aluminium 6082 is the most common heat treated alloy plate from stock. In plate form, 6082 is the alloy most commonly used for machining. It can be found in a number of construction and building projects such as trusses, bridges, cranes, and high quality ore skips. It is also found in highly stressed applications like beer barrels, milk churns and has a huge range of transport applications. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy. It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 series. In the T6 and T651 temper, alloy 6082 machines well and produces tight coils of swarf when chip breakers are used. -- APPLICATIONS -- 6082 is typically used in: ~ Highly stressed applications ~ Trusses ~ Bridges ~ Cranes ~ Transport applications ~ Ore skips ~ Beer barrels ~ Milk churns -- TEMPER TYPES -- The most common tempers for 6082 aluminium are: T6 – Solution heat treated and artificially aged O – Soft T4 – Solution heat treated and naturally aged to a substantially stable condition T651 – Solution heat treated, stress relieved by stretching then artificially aged -- SUPPLIED FORMS -- Alloy 6082 is typically supplied as Channel, Angle, Tee, Square bar, Square box section, Rectangular box section, Flat bar, Tube and Sheet. Plate and sheet can also be supplied as 6082-T651. -- WELDABILITY -- 6082 has very good weldability but strength is lowered in the weld zone. When welded to itself, alloy 4043 wire is recommended. If welding 6082 to 7005, then the wire used should be alloy 5356. Gas: Good | Arc: Good | Resistance: Good -- FABRICATION -- Workability - Cold: Good Machinability: Good
Aluminium Alloy 7075 - Aircraft Grade
Aluminium 7075 is one of the highest strength aluminium alloys available. It has an excellent strength-to-weight ratio and is ideally suited for highly stressed structural applications in the aerospace and defence industries. 7075 was first developed in Japan in 1943 and was immediately used for airframe structures in World War II aircraft. Today it remains the most widely used aluminium alloy for aircraft applications including wing spars, fuselage structures, and other critical components. -- KEY FEATURES -- ~ One of the highest strength aluminium alloys ~ Excellent fatigue resistance ~ Good machinability ~ Average corrosion resistance (often clad for protection) ~ Stress-corrosion cracking resistant in T73 temper -- APPLICATIONS -- 7075 is typically used in: ~ Aircraft structural components ~ Wing spars and fuselage ~ Military equipment and ordnance ~ Rock climbing equipment ~ Bicycle components ~ High-stress recreational equipment ~ Mould tooling (in softer tempers) ~ Keys and key blanks -- TEMPER TYPES -- Common tempers include: T6 – Solution heat treated and artificially aged (highest strength) T651 – T6 plus stress relieved by stretching T73 – Overaged for improved stress-corrosion resistance O – Annealed (soft) -- WELDABILITY -- 7075 is generally considered not weldable by conventional methods due to its tendency to crack. Mechanical fastening is the preferred joining method. If welding is required, friction stir welding or specialized techniques may be used.
Aluminium Alloy 7075-T6
7075-T6 is a high strength alloy originally developed for aircraft and aerospace applications, often referred to as “aircraft grade”. The main alloy ingredients of zinc and copper make 7075 one of the highest strength aluminium alloys available. 7075 in the T6 temper is stronger than most mild steels. 7075 is considered to have good machinability, good corrosion resistance but is not good for welding. Aluminium 7075-T651 has similar characteristics to T6 but goes through an extra process to relieve some of the stresses in the material. Features: - Strength comparable to many steels - Good fatigue strength - Average machinability - Can be highly polished Applications: - Marine, automotive and aviation - Hang glider airframes - Rock climbing equipment - Bicycle components
Aluminium Angle Grade 6063
Aluminium Equal and Unequal Angles. 6063 architectural grade.
Aluminium Angle Grade 6082
Aluminium Equal and Unequal Angles. 6082 structural grade.
Aluminium Bronze (AB2 / CuAl10Fe5Ni5)
Aluminium Bronze (AB2) is a high-strength copper alloy containing aluminium, iron, and nickel. It combines excellent corrosion resistance (particularly in seawater) with high mechanical strength and wear resistance. Commonly used for: • Marine fittings and propellers • Bearing bushes and gears • Valve seats and pump components • Heavy-duty fasteners • Heat exchangers Available as round bar in a range of metric and imperial diameters, cut to required length.
Aluminium Flat Bar
Aluminium Flat Bar in 6082 T6 structural alloy. Excellent machining properties and good corrosion resistance.
Aluminium Round Bar Grade 2011
Extruded and Drawn Aluminium Round Bar. Machining grade 2011 available from stock.
Aluminium Shapes & Profiles
Stainless and Aluminium offer a range of cutting and pre-fabricating services. In addition to cut to length we can also offer band sawn aluminium shapes and profiles, these include diameters and rings sawn from plate. We can also cut other shapes including half moons and irregular shapes. Most items can be cut from our current stock to your specific requirements.
Aluminium Shapes Band Sawn (Custom Cut)
Stainless and Aluminium offer a range of cutting and pre-fabricating services on site. In addition to cut to length we can also offer band sawn aluminium shapes and profiles, these include diameters and rings sawn from plate. We can also cut other shapes including half moons and irregular shapes. We are happy to supply single pieces or large call off jobs. Most items can be cut from our current stock. Please call to discuss your requirements.
Aluminium Sheet Grade 5083
Aluminium Sheet in grade 5083 (Marine Grade).
Aluminium Sheet Grade 6082
Aluminium Sheet in grade 6082.
Aluminium Tooling Plate Grade 5083 (Cast & Machined)
EN AW-5083: A specialist aluminium alloy for tool making, mold making and model making. EN AW-5083 is known for its exceptional performance in extreme environments, it is extremely resistant to attack by seawater and industrial chemical environments. 5083 also retains exceptional strength after welding. Features: - Surface machined cast plates - Very good machinability - Excellent corrosion resistance - Good welding properties - Low stress and dimensionally stable - PVC coated on both sides Applications: - Tool making, mold making and model making - Blow molds and injection molds - Laminating tools - Molds for elastomer materials - Molds and heat-stressed parts - Refrigeration technology
Aluminium Tube & Box Grade 6063
Aluminium Round Tube and Box Section (Square/Rectangular) in grade 6063. Lightweight and strong for frames and structures.
Aluminium Tube & Box Grade 6082
Aluminium Round Tube and Box Section (Square/Rectangular) in grade 6082. Lightweight and strong for frames and structures.
Angled Steel Section (Cold Rolled)
At Stainless and Aluminium we provide standard galvanized rolled steel angles for various structural purposes. We can provide fully customized steel angles, creating each section specific to your requests. Our angled steel sections come pre-pierced, however, if you have specific piercing requests, we can provide that for you. Our standard bespoke steel angles are crafted to optimum efficiency. Steel angles are one of the most basic types of rolled steel, and they can be used for making frames, racks and any general fabrication. They are simply made by bending a single angle in the piece of steel. The angle steel shape resembles an ‘L’.
BDMS (080A15) Flats – Bespoke Cut
Bright Drawn Mild Steel (BDMS) 080A15 flat bar is a low carbon steel with a smooth, bright surface finish achieved through the cold drawing process. It offers improved surface quality, better dimensional accuracy, and higher tensile strength compared to hot rolled equivalents. BDMS 080A15 flats are commonly used for: • General engineering applications • Brackets and supports • Jigs and fixtures • Machine components • Bright fabrication work Available in a wide range of standard width × thickness combinations, bespoke cut to your required length.
BDMS (080A15) Round Bar – Bespoke Cut
Bright Drawn Mild Steel (BDMS) 080A15 round bar offers excellent dimensional accuracy and a smooth surface finish. The cold drawing process increases tensile strength and hardness over the hot rolled equivalent whilst maintaining good ductility and weldability. BDMS 080A15 round bar is commonly used for: • Shafts, pins, and dowels • General turning and machining • Studs and fasteners • Bushes and spacers Available in metric and imperial diameters, bespoke cut to length.
Brass Angle CZ130
Brass Angle CZ130 - available in a range of sizes.
Brass Hexagon CZ121
Brass Hexagon CZ121 - available in a range of sizes.
Brass High Tensile CZ114
High tensile brass, suitable for heavy duty applications.
Brass Naval Rolled CZ112
Naval brass with good corrosion resistance in seawater environments.
Brass Riveting Quality CZ131
Riveting quality brass, highly ductile.
Brass Round Bar CZ121
Brass is a copper-zinc alloy where zinc content varies from 10% to about 39%. High zinc content (39%) produces free-machining brass, typically with lead additions. CZ121 is the most common free-machining grade, often containing lead for improved machinability. It is a cost-effective alternative to steel and has excellent corrosion resistance. Free machining brass rod, the standard grade for high speed machining.
Brass Sheet CZ108
Common brass sheet grade, used for general fabrication and cold forming.
-1200.webp)
CDS (Cold Drawn Seamless)
Cold drawn seamless tubing offers better surface finish and closer tolerances than hot finished tube.
Circular Hollow Section (CHS) S275 - Structural Steel Tube
Mild steel structural tubing S275 supplied from stock to the construction industry throughout the UK. Circular Hollow Section-CHS There are many hollow section profiles, some of which Steel Express has on stock including RHS and SHS. Hollow sections have a vast number of uses and are beneficial throughout the construction industry. What is CHS? One sectional structure that Steel Express keeps in stock is the circular hollow section or CHS. This section gets its name from the circular shape on the outer portion of the section. It comes standard in mild steel S275 grade. CHS has the most versatile uses, but are usually used in welded steel frames and in the construction of columns. Circular cross sections are excellent at torsion resistance which makes them a good fit for many construction jobs. Diameters and Thickness The thickness of each hollow section is uniform throughout and Steel Express has a variety of shapes and diameters readily available for nationwide delivery. The outside diameter of the structure can vary from 21.3 mm in size to 168.3 mm. And the thickness can range from 2 mm to 40 mm. And circular hollow sections shouldn't be confused for metal pipes since the dimensions of the two are measured very differently and one is used for water flow while the other for structural support and framing. With the variety of material and range of sizes and thickness, Steel Express has the material you need for your construction job. So, just give us a call to partake in our nationwide delivery of top-notch material.
Circular Hollow Section (CHS) S355 - Structural Steel Tube
Mild steel structural tubing S355 supplied from stock to the construction industry throughout the UK. Circular Hollow Section-CHS There are many hollow section profiles, some of which Steel Express has on stock including RHS and SHS. Hollow sections have a vast number of uses and are beneficial throughout the construction industry. What is CHS? One sectional structure that Steel Express keeps in stock is the circular hollow section or CHS. This section gets its name from the circular shape on the outer portion of the section. It comes standard in mild steel S355 grade. CHS has the most versatile uses, but are usually used in welded steel frames and in the construction of columns. Circular cross sections are excellent at torsion resistance which makes them a good fit for many construction jobs. Diameters and Thickness The thickness of each hollow section is uniform throughout and Steel Express has a variety of shapes and diameters readily available for nationwide delivery. The outside diameter of the structure can vary from 21.3 mm in size to 168.3 mm. And the thickness can range from 2 mm to 40 mm. And circular hollow sections shouldn't be confused for metal pipes since the dimensions of the two are measured very differently and one is used for water flow while the other for structural support and framing. With the variety of material and range of sizes and thickness, Steel Express has the material you need for your construction job. So, just give us a call to partake in our nationwide delivery of top-notch material.
Cold Drawn Seamless Tube (Hydraulic)
Hydraulic Cold Drawn Seamless (CDS) tubes are used to make hollowed chrome plated telescopic cylinders and hydraulic rods. Popular for large bore, heavy walled, high pressure hydraulic cylinders. Hydraulic CDS tubes offer superior physical properties and are capable of withstanding high pressure. Standard: BS 3602 Part 1 CFS Cat 2 (Alternatively DIN 2391 ST 35.4 NBK).
Cold Drawn Seamless Tube (Mechanical)
Cold Drawn Seamless (CDS) mechanical tubes are used in applications requiring high strength and tight tolerances. "Cold Drawn" refers to the process that creating an end-product physically superior to its hot finished counterpart, offering a sleeker, smoother finish and tighter tolerances. CDS is popular for heavy equipment manufacturing such as cranes and garbage trucks, where immense strength and precision are required. Standard: BS 6323 Part 4 : 1982 Bright-as-Drawn – CFS 3 BK Annealed – CFS 3 GBK.
Collapsible Gate Section
We supply an industry-standard W track profile made for successfully directing sections of security grilles. These specific steel sections have many uses such as heavy-duty industrial doors. The gate sections are made to optimal efficiency and specification, allowing customers to choose from a variety of materials. whatever your collapsible gate needs, our products ensure reliability and smooth operation.
Copper Bar C101
Pure copper is valued for its high electrical and thermal conductivity. C101 is a high-conductivity grade (99.9% min purity). Copper is highly ductile and corrosion-resistant, often featuring an attractive green patina (oxide film) in architectural use. High conductivity copper sheet/bar for electrical applications (HC Copper).
Copper Tube C106
Phosphorus de-oxidised non-arsenical copper, the standard grade for copper tube.
Cross Beam Profile
Optimal for racking and storage systems, we supply top cross beam profiles that will provide ultimate strength and support. Our specially constructed cross beam sections are made to the highest specification, allowing you to order them from a variety of materials. Stainless and Aluminium manufactures premium cross beams that can serve for a variety of purposes. Cross beams are ultimately made for the effective span, which is when cross beams are required. Cross beams help avoid progressive collapse for a structural project. Our beams are made to be extremely strong, to be used in subsequent vulnerable portions such as slabs. The common usage of cross beams is generally to help break the span of the slab when the span is usually too large.
D2 (1.2379) Round Bar
D2 (1.2379) Round Bar - available in a range of sizes.
D2 Economiser (1.2379)
D2 Economiser (1.2379) - available in a range of sizes.
-1200.webp)
D2 Tool Steel (1.2379)
D2 Steel is a high carbon, high chromium cold work tool steel. Recommended for use when greater toughness is required. It offers good wear resistance and high compressive strength.
EN14 Chrome Bar
EN14 Chrome Bar - available in a range of sizes.
EN16T (605M36T) Round Bar
EN16T (605M36T) Round Bar - available in a range of sizes.
EN19T (709M40T) Round Bar – Bespoke Cut
EN19T (709M40T) is a high quality, high tensile alloy steel, supplied in the hardened and tempered 'T' condition. EN19T is a through-hardening medium carbon chromium-molybdenum alloy steel offering high strength combined with good ductility and wear resistance. It is used extensively in the automotive, engineering and aerospace sectors for components such as gears, shafts, spindles, studs, bolts, connecting rods, and general high-strength engineering applications. EN19T offers: • High tensile strength (850-1000 MPa) • Good ductility and impact resistance • Suitable for further heat treatment • Good wear resistance All material available bespoke cut to length or fixed lengths and in imperial or metric sizes. Our standard tolerances on +/- on lengths will apply. Please allow for any machining tolerances you may require. If in doubt please call us.
EN1A (230M07) Leaded Round Bar – Bespoke Cut
EN1A (230M07) is a free-cutting mild steel with excellent machinability. The lead content (or equivalent) provides superior chip-breaking properties, making it the preferred choice for high-speed automatic lathe work and CNC machining. EN1A is widely used for production of turned parts, studs, bolts, nuts, and precision components where good surface finish and consistent machinability are critical. EN1A offers: • Excellent machinability (rated 100% on the machinability index) • Good surface finish • Suitable for case hardening • Cost-effective for high-volume turned parts Available in a range of metric and imperial diameters, cut to your required length.
EN8 Chrome Bar
EN8 Chrome Bar - available in a range of sizes.
Engineering Steel EN8
Unalloyed medium carbon steel. Used for applications where better properties than mild steel are required.
ERW Steel Tubing
ERW stands for electric resistance welded and is a type of welding process that welds together spots and seams. This kind of welding is used in the manufacturing of steel tubing and pipes. These tubes can be square, rectangular, or round. Steel Express offers ERW Steel Tubes in a variety of shapes, sizes, and finishes to fit your steel structural needs. We include standard mild steel tubes or tubes with a semi-bright finish. Round, square, and rectangular pipes are available and all ERW steel tubing vary in size. - Round ERW tubes range 9.5 mm to 152.4 mm - Square tubes range from 12.7 x 12.7 mm to 50.8 x 50.8 mm - Rectangular tubes ranging from 25.4 mm x 12.7 mm to 63.5mm x 38.1mm The Steel Express collection of ERW tubes are very diverse in shape and size which makes it easier to locate the right tube for the job. Since ERW steel pipes and tubes offer various engineering purposes it’s important to have a variety to choose from.
Formodal® 036 Tooling Plate (EN AW-7021)
Formodal® 036 is a high-strength, heat treated aluminium plate (EN AW-7021 special type). It is a specialist aluminium alloy for tool, mould and model making. It can be supplied in a range of forms. Formodal® 036 has outstanding machining properties, good dimensional stability and low internal stress. Features: - High-strength aluminum cast plates - Surface machined and PVC coated or rough sawn - Low internal stresses - Very good dimensional stability - Very homogeneous - Good welding properties - Good corrosion resistance Applications: - Tool making, mould making and model making - Injection moulds - Blow moulds - Machine and fixture construction - Base plates, table tops and mounting plates - Rapid tooling and prototype construction - Structures with high strength requirements
Galvanised Sheet
Galvanised sheet steel is zinc-coated mild steel offering excellent protection against corrosion. Available in a range of thicknesses and sheet sizes, it is widely used in roofing, cladding, ducting, and general fabrication. The zinc coating provides a sacrificial barrier, protecting the underlying steel even when the surface is scratched or cut.
Ground Flat Stock 500mm
Ground Flat Stock 500mm - available in a range of sizes.
H13 (1.2344) Round Bar
H13 (1.2344) Round Bar - available in a range of sizes.
-1200.webp)
H13 Tool Steel (1.2344)
H13 is an air hardening chromium die steel. The higher vanadium content ensures increased resistance to heat checking and all round improvement to properties at elevated temperatures.
High Speed Steel M2
M2 is the standard high speed steel grade. Excellent wear resistance and toughness.
Hot Finished Seamless Steel Tube
Hot Finished Seamless (HFS) tubes are a cost-effective option for applications where the tighter tolerances of CDS are not critical. They feature a rougher finish but offer great machinability and are suitable for many processing techniques. Available in a wide range of sizes for structural needs. Standard: EN 10297-1. Outer diameters from 50.8mm to 660mm. Wall thicknesses from 4mm to 100mm.
Hot Finished Seamless Tube
Hot finished seamless steel tube is often used for heavy wall thickness applications. It is cost effective and readily available.
Industrial Hinge Profile
We manufacture some of the most durable and lasting industrial hinges on the market. At Stainless and Aluminium we supply industrial rear and front hinges that are specifically suited for vertical industrial doors. Each hinge is crafted to the highest specification, delivering customers optimal efficiency. These heavy-duty hinges are made for large industrial doors and gates. They are designed to be installed and work effortlessly as a ready-to-use hinge. Our hinges are made to hold extremely heavy gates and doors, without ever breaking or collapsing under pressure.
K100 (D3 / 1.2080) Tooling Plate
K100 (D3 / 1.2080) is a high-carbon, high-chromium cold work tool steel offering exceptional wear resistance and good compressive strength. It is supplied as precision-ground tooling plate. Commonly used for: • Blanking and forming dies • Thread rolling dies • Gauges and measuring tools • Punches and shear blades Available as precision-ground plate with tight thickness tolerances.
Mild Steel Angle
Mild Steel Equal Angles are one of the most commonly used structural steel shapes. These L-shaped sections are used extensively in construction, fabrication, and general engineering. They provide excellent rigidity for frameworks, brackets, supports, and bracing. Our mild steel angles comply with BS EN 10025 S275JR and are available in a range of sizes from 20 x 20mm up to 200 x 200mm. We can supply these in standard 6m lengths or cut to your exact requirements. Mild steel angles are easy to weld, drill, and machine, making them suitable for a wide range of structural and non-structural applications.
Mild Steel Box Section S275 (RHS & SHS)
Steel Express offers two types of box sections that are available in a variety of sizes, thickness, and materials and can also be finished hot or cold. These are just a few of the hollow structural sections that we have to offer. What is Rectangular Hollow Section (RHS)? RHS is a type of HSS that with a tubular section hollowed through the metal. It is referred to as rectangular because of its outer shape. The RHS is the most common steel and is usually used in welding steel frames. At Steel express we offer these sections in sizes varying from 50 x 25 mm to 450 x 250mm with a max thickness of 16mm. What is Square Hollow Section (SHS)? There are also square hollow sections available or SHS. They are usually used in constructing columns and similar structures. SHS gets its name from the square shape of its hollowed structure. This section is normally available in mild steel S275 and varies in size from 20 x 20mm to 300 x 300 and a thickness ranging from 2 mm to 16mm. Box Sections The two sections together are referred to as box sections. These hollow sections come in mild steel grade S275. And best of all, Steel Express can deliver these mild steel box sections nationwide. So, give us a call if you're in need of one of our steel box sections and we can deliver them to you.
Mild Steel Box Section S355 (RHS & SHS)
Steel Express offers two types of box sections that are available in a variety of sizes, thickness, and materials and can also be finished hot or cold. These are just a few of the hollow structural sections that we have to offer. What is Rectangular Hollow Section (RHS)? RHS is a type of HSS that with a tubular section hollowed through the metal. It is referred to as rectangular because of its outer shape. The RHS is the most common steel and is usually used in welding steel frames. At Steel express we offer these sections in sizes varying from 50 x 25 mm to 450 x 250mm with a max thickness of 16mm. What is Square Hollow Section (SHS)? There are also square hollow sections available or SHS. They are usually used in constructing columns and similar structures. SHS gets its name from the square shape of its hollowed structure. This section is normally available in mild steel S355 and varies in size from 20 x 20mm to 300 x 300 and a thickness ranging from 2 mm to 16mm. Box Sections The two sections together are referred to as box sections. These hollow sections come in mild steel grade S355. And best of all, Steel Express can deliver these mild steel box sections nationwide. So, give us a call if you're in need of one of our steel box sections and we can deliver them to you.
Mild Steel Channels (Parallel Flanged)
These steel structures are c-shaped beams that have a multitude of applications in a variety of industries including agricultural, transportation, manufacturing, fabrication, and industrial maintenance to name a few. Channels are the ideal shape for making repairs and all other structural applications. Its shape gives it the added strength and rigidity that is necessary for the heavy-duty jobs that it is used for. Which is what makes it a better option over steel angles for some jobs because it is a lot more stable and supports vertical and horizontal loads better. This is a very popular item for many structural jobs which is why we offer a variety of sizes. We supply steel channels in a number of different grades such as BS EN 10025, S275, and S355. Our company offers steel channels a variety of different sizes ranging from 76 mm x 38 mm to 432 mm x 102 mm. And if you require any non-standard sizes we can press brake the items you need for the job. So, if you’re in need of mild steel channels for your project give us a call today. We can deliver them to wherever your site may be across the nation.
Mild Steel Flats
Mild Steel flats are used in a plethora of different industrial needs. From fabrication and repairs in large scale industrial maintenance to transportation, agricultural applications, and other fields of construction and industrial work. Mild Steel flats are one of the most versatile materials. So, there is a great need to have a variety of mild steel flats available to tackle any kind of industrial job. Steel Express has made available numerous combinations of steel flat thicknesses and width ranging from 10 mm to 400 mm in width and 3 mm to 60 mm in thickness. And along with these vast steel flat sizes, the flat can be supplied in different grades of steel including BS 10025, S275, and S355.
Mild Steel Hollow Section (SHS / RHS)
Mild Steel Hollow Sections are available in both Square (SHS) and Rectangular (RHS) profiles. These sections are widely used in construction, fabrication, and general structural work. They offer excellent strength-to-weight ratio and clean lines, making them ideal for frames, supports, railings, gates, and architectural applications. Our hollow sections are manufactured to BS EN 10210 (hot finished) and BS EN 10219 (cold formed) standards in grade S275J0H / S355J2H. Available in standard 6m lengths or cut to your specific requirements.
Mild Steel Plate – CR4 & HR4 Sheets
Mild steel plates and sheets can be produced in HR4, CR4, or in galvanized sheets. They are also available in several grades of steel including S335 and S275. We offer a broad range of steels plates that vary in length, width, thickness, and mass per square meter to meet the multitude of purposes that steel sheets and plates are used for. **What are HR4 Steel Sheets** HR4 stands for Hot rolled steel sheets which refers to the process by which the sheets are made. HR sheets result in a finished product that has a grainy surface. HR Steel sheets are the most economical of the steel sheets that is offered and has many different purposes and are easy to drill, weld, and form. **What are CR4 Steel Sheets** CR4 stands for Cold reduced steel sheets. Making steel sheets and plates using this method results in a product with a smoother surface and a fine finish. This product Is used for a multitude of purposes including fuel tanks, tool boxes, drip pans, trailer siding, etc. This product also provides a terrific painting surface. **What are Galvanized Sheets** This type of steel is used in areas of construction that are susceptible to high levels of corrosion. This type of steel provides greater protection and typically has a lifespan of 20 years. **Fabrication** We also offer fabrication services of mild steel sheets for more customized jobs. So, call today to see how we can help you.
Mild Steel Round Bars
A Steel Round bar is a solid, cylindrical beam that can be used for any number of general fabrication purposes such as repairs and manufacturing. The use of round bars is common in industries such as agriculture, transportation, maintenance, fencing, and even artwork. It is shaped perfectly for welding, it can be cut, formed, or even machined with the right equipment and know-how. Our company provides round bars in a few different grades including S275 and S355. Also, we offer a multitude of sizes to our customers for any job they have. Our round bars come in sizes starting at 6mm in diameter to 210 mm which can be delivered to wherever your construction site might be across the nation. Our rounds are just one of several bar shapes that we offer, but the rounds are typically hot finished. To help you make your decision we include a steel weight calculator. So, whether you are performing industrial repairs to buildings and other large structures or fabricating general projects for a multitude of industries, our company has the steel rounds that you need to get the job done. With our diverse stock, there is no guess work in whether or not we have a size that fits your needs. So, don’t hesitate to call us today if you want to know more about our round bar sizes, finishes, and grades of steel that we have available to be shipped directly to your site anywhere in the nation.
Mild Steel Square Bars
Mild Steel Square Bars are a necessity for all fabrication of general structures and industrial maintenance repairs. Its super convenient shape is well suited for jobs throughout the industrial fabrication including: helping to create braces, axles, frame work, trim, awnings, fittings, structures, instruments, gym equipment, and other similar projects. Square bars can come in two finishes, hot or cold. The hot finished square bar can have a grainy texture to it but is easy to weld, cut, form, or even machine. This is the finish used mostly for structural tasks like making supports and frame work. The cold finished steel square bar has a smoother surface to it. It usually contains less carbon than its hot finished counterpart and has a sharper edge to it making it more accurate to its dimensions. Cold finished steel bars are commonly used in machine mounts, shafts, fixtures and other related projects. Our company offers mild steel square bars in a variety of sizes extending upward from 6mm in diameter to 210 mm and comes in several steel grades and most importantly, they’re available in different finishes for any job you have. Give us a call and ask about our selection.
Mild Steel Structural Angles S275 (Equal & Unequal)
Structural angles are L-shaped cross sections that have a plethora of applications in structural steel work. Structural Steel angles may be needed for any job big or small. There are a multitude of jobs where angles are needed in and that's why we offer a multitude of steel angle sizes and thicknesses so that any structural job requiring this L-Shaped structure can be fulfilled without worry. Our angles are made with mild steel S275 and vary in sizes from 20 x 20mm to 200 x 200mm with many different combinations of sizes readily available so that we will have a size that can fit your structural needs. And if by chance the sizes we have in stock don't work for you, we offer fabrication services and can press brake nonstandard items. Our press brake machine can bend material up to 20mm thick and 12.5 m long. It is perfect for creating a large run of a single shaped metal and works with a variety of material. Between our vast variety of standard sizes and our ability to customize, customers won't need to look anywhere else for their steel angle. So, call Steel Express, we offer nationwide delivery to wherever you may be. We supply the construction industry with Structural Steel grade S275 plates, flats and blocks.
Mild Steel Structural Angles S355 (Equal & Unequal)
Structural angles are L-shaped cross sections that have a plethora of applications in structural steel work. Structural Steel angles may be needed for any job big or small. There are a multitude of jobs where angles are needed in and that's why we offer a multitude of steel angle sizes and thicknesses so that any structural job requiring this L-Shaped structure can be fulfilled without worry. Our angles are made with mild steel S355 and vary in sizes from 20 x 20mm to 200 x 200mm with many different combinations of sizes readily available so that we will have a size that can fit your structural needs. And if by chance the sizes we have in stock don't work for you, we offer fabrication services and can press brake nonstandard items. Our press brake machine can bend material up to 20mm thick and 12.5 m long. It is perfect for creating a large run of a single shaped metal and works with a variety of material. Between our vast variety of standard sizes and our ability to customize, customers won't need to look anywhere else for their steel angle. So, call Steel Express, we offer nationwide delivery to wherever you may be. We supply the construction industry with Structural Steel grade S355 plates, flats and blocks.
Mild Steel T Sections
Mild Steel T Sections are long steel T shaped structures that are typically used in general fabrication and are used for industrial partitioning. Other common uses include being a rail for roller doors when the T section has a rolled edge, but its’s shape limits the number of industrial uses it could have. T sections can be easily painted and primed for any job they are used for. These structures can be cut, welded, and drilled easily and come in several standardized lengths or can be cut to any custom length you require. A T section thickness can range from 1.6 mm to 2 mm depending on the job you require it for. T Sections can be cold rolled, hot rolled, oiled, pickled, or pre-galvanized depending on your needs. So, if you are in need of mild steel T sections for your job don’t hesitate to give us a call. We provide quick and easy delivery services to our clients anywhere their site might be across the country while providing competitively priced items found in stock or customized with the exact specifications you provide us with. So, check out what makes us stand out from the rest.
Mild Steel Unequal Angle
Mild Steel Unequal Angle - available in a range of sizes.
Nylon 6 Cast Dia
Cast Nylon 6 rod, generally stress-free with high degree of crystallinity.
Nylon 6 Extruded Dia
Nylon 6 or PA 6 as it is also know is a semicrystalline polyamide and a versatile engineering thermoplastic. Nylon 6 has an excellent balance of toughness and resistance to heat and chemicals, it is a harder plastic than others. It is a good engineering plastic to consider where metal replacement is being sort after. Because of its high performance and low cost Nylon 6 is becoming a great solution for many engineering projects. It is very easy to machine and has a high mechanical strength. Applications: used where high mechanical strength, great rigidity, and good stability under heat is required. Bearings, gears, sprockets, bushes, profiles and machined parts.
Nylon 6 Sheet
Nylon 6 sheet material for machining parts.
Nylon 66 Cast Dia
Cast Nylon 66 (PA 66) rod offers superior mechanical properties compared to extruded variants. The casting process produces a stress-free material with high crystallinity, excellent dimensional stability, and enhanced wear resistance. Cast Nylon 66 provides higher strength and stiffness than Nylon 6, with better heat resistance and lower moisture absorption. Ideal for heavy-duty applications requiring exceptional durability. Applications: Heavy-duty gears, high-load bearings, wear strips, guide wheels, rollers, bushings, and precision machined components in demanding industrial environments.
Nylon 66 Extruded Dia
Nylon 6/6 or PA 66 as it is also know is a semicrystalline polyamide and a versatile engineering thermoplastic. Nylon 6/6 has an great balance of toughness, flexibility and resistance to heat, it is stiffer and harder but more brittle than its counterpart nylon 6. It has a higher melting point and is used where higher operating temperatures are needed. Applications: Bearings, gears, sprockets, bushes, profiles and machined parts.
Nylon 66 Sheet
Nylon 66 sheet. High mechanical strength and stiffness.
O1 (1.2510) Round Bar
O1 (1.2510) Round Bar - available in a range of sizes.
O1 Economiser (1.2510)
O1 Economiser (1.2510) - available in a range of sizes.
-1200.webp)
O1 Tool Steel (1.2510)
O1 is an oil hardening carbon manganese tool steel, possessing excellent dimensional stability during heat treatment. Typical applications: Press Tools, Broaches, Clipping, Marking Punches.
Open Box / C Section
Open box, otherwise known as C section, is mainly used for manufacturing industries, construction, and transportation. You will need one of these high-quality steel sections for dimensional accuracy and where extra durable steels are required. Our steel box sections are supplied in custom lengths and are made to the highest efficiency to help improve strength. Each part of our open box sections is custom designed to ensure you get the premium product you need, complete with holes and notching. The C sections are often used for a wall girt in some type of structural system. Whatever your heavy-duty structure needs, our specially crafted open box / C section will provide the durability and support. We allow you to choose from a selection of quality materials, whether you want it hot rolled, pickled or oiled.
P20 (1.2311) Round Bar
P20 (1.2311) Round Bar - available in a range of sizes.
-1200.webp)
P20 Tool Steel (1.2311)
P20 Pre hardened to approximately 300 B.H (65 t.s.i). P20 requires no further heat treatment therefore avoiding risk of distortion or cracking.
P20s Economiser (1.2312)
P20s Economiser (1.2312) - available in a range of sizes.
Pe100
High-density polyethylene (HDPE) - PE100 grade.
Perforated Sheet – Aluminium
Aluminium perforated sheet is lightweight and corrosion resistant, ideal for decorative panels, ventilation screens, speaker grilles, and architectural cladding. Available in various alloys, sheet sizes, and hole patterns.
Perforated Sheet – Galvanised
Galvanised perforated sheet combines the strength of mild steel with zinc coating for corrosion protection. Used for guarding, screens, drainage covers, and agricultural applications. Available in standard sheet sizes with various round and square hole patterns.
Perforated Sheet – Mild Steel
Mild steel perforated sheet is a cost-effective solution for screening, guarding, drainage, and industrial filtration. Can be subsequently galvanised or painted. Available in standard sheet sizes with various hole patterns at competitive prices.
Perforated Sheet – Stainless Steel 304
Stainless steel 304 perforated sheet is available in a range of standard hole patterns including round holes and square holes. Commonly used for screening, filtration, ventilation, guarding, and decorative applications. Available in a range of standard sheet sizes, hole diameters, and pitch patterns. Bespoke sizes and patterns available on request.
Perforated Sheet – Stainless Steel 316
Stainless steel 316 perforated sheet offers enhanced corrosion resistance over 304, making it suitable for marine, chemical, and food processing applications where perforated material is required. Available in standard sheet sizes with various round and square hole patterns.
Phosphor Bronze PB102
Phosphor bronze is an alloy of copper with between 3.5 and 10% tin and a phosphorus content of up to 1%. The phosphorus acts as a deoxidizing agent, increasing strength and fatigue resistance while maintaining a low coefficient of friction. PB102 is the most common grade, offering high wear resistance and good corrosion resistance.
Phosphor Bronze PB104
Ideally suited for heavy duty bearings and gears, offering higher strength than PB102.
Polycarbonate Sheets 2050mm x 1250mm
Polycarbonate (PC) is a widely used engineering thermoplastic with great properties: it is transparent, strong, has good dimensional and thermal stability, and unmatched impact resistance. It is used in products such as DVDs, eyewear, lenses, riot shields, and security glass. Polycarbonate is naturally transparent with light transmission almost as well as glass, but is virtually unbreakable.
Polyethylene
General purpose Polyethylene material.
-1200.webp)
Polypropylene (PP)
Polypropylene (PP) is a semi-crystalline thermoplastic polymer used in packaging, reusable containers, textiles, automotive components, and banknotes. It is strong and resistant to many organic solvents, degreasing agents, and acids. Available in Polypropylene H (PP-H) for engineering/tooling and PP-C (Polypropylene Copolymer) for hygienic cladding.
-1200.webp)
PTFE (Teflon)
PTFE which is almost alway referred to as Polytetrafluoroethylene is an engineering plastic that has many modern day applications (also known as Teflon). PTFE is chemically inert, weatherable, a great electrical insulation, it has both a high temperature resistance, and a low coefficient of friction and non-adhesive properties. Teflon® is a familiar trade name for polytetrafluoroethylene (PTFE) made by DuPont. One application of PTFE is the cooking industry and cookware production as it is a perfectly suited to a non-stick coating on kitchen pans and utensils. As well as being a great resource in the cooking industry it is also used to make and containers and pipes in industries that contain corrosive or reactive chemicals due to its non-reactive makeup.
-1200.webp)
PVC (Polyvinyl Chloride)
Polyvinyl chloride which is often called PVC and vinyl is the world’s third-most widely produced synthetic plastic polymer, apart from polyethylene and polypropylene. PVC has great strength, lightweight, durable and flame retardant. The characteristics of Polyvinyl chloride make them an excellent choice in kitchens and bathrooms. This particular plastic is also a popular choice with trade customers who work in the construction industry.
Racking Upright Profile
For all your pallet racking and beam support needs, Stainless and Aluminium has designed the highest-quality racking upright steel sections. They are extremely heavy-duty to help support and withstand any weight for a long period of time. Our racking uprights can be pre-punched for your specific variety of holes, cut exactly to your specific lengths. We provide many shapes of holes and can wield any design of holes upon specific requests. A racking upright is the vertical bar that is most commonly used to support a pallet racking beam where heavy pallets are stored. The upright comes in various heights. However, it can be used for many other structural and support purposes.
Soluble Cutting Oil
High performance soluble cutting oil for general machining operations. Provides excellent cooling and lubrication properties, extending tool life and improving surface finish.
Stainless Steel 17-4PH
17-4 PH is a chromium-copper precipitation hardening stainless steel used for applications requiring high strength and a moderate level of corrosion resistance.
Stainless Steel 303 Hexagon Bar (3m)
Stainless Steel 303 Hexagon Bar (3m) - available in a range of sizes.
Stainless Steel 303 Round Bar Rough Turned (3m)
Stainless Steel 303 Round Bar Rough Turned (3m) - available in a range of sizes.
Stainless Steel 303 Round Bar Smooth Turned (3m)
Stainless Steel 303 Round Bar Smooth Turned (3m) - available in a range of sizes.
Stainless Steel 304 Tube & Pipe (Welded)
Stainless & aluminium can supply stainless steel 304 welded tubing. All stainless stock can be delivered mirror polished if required. Available Ranges: - Welded Round Tube (Mirror & Dull Polished) - Handrail Sections - Square & Rectangular Tube (Dull Polished & Unpolished)
Stainless Steel 304L Flat Bar Hot Rolled (3m)
Stainless Steel 304L Flat Bar Hot Rolled (3m) - available in a range of sizes.
Stainless Steel 304L Round Bar Bright Drawn (3m)
Stainless Steel 304L Round Bar Bright Drawn (3m) - available in a range of sizes.
Stainless Steel 304L Round Bar Smooth Turned (3m)
Stainless Steel 304L Round Bar Smooth Turned (3m) - available in a range of sizes.
Stainless Steel 304L Tube & Pipe (Seamless)
Stainless & aluminium can supply stainless steel 304L seamless tubing and pipe. All stainless stock can be delivered mirror polished if required. Available Ranges: - Seamless Pipe & Tube (304L)
Stainless Steel 316 Round Bar Rough Turned (3m)
Stainless Steel 316 Round Bar Rough Turned (3m) - available in a range of sizes.
Stainless Steel 316 Round Bar Smooth Turned (3m)
Stainless Steel 316 Round Bar Smooth Turned (3m) - available in a range of sizes.
Stainless Steel 316 Tube & Pipe (Welded)
Stainless & aluminium can supply stainless steel 316 welded tubing. All stainless stock can be delivered mirror polished if required. Available Ranges: - Welded Round Tube (Mirror & Dull Polished) - Handrail Sections - Square & Rectangular Tube (Dull Polished & Unpolished)
Stainless Steel 316L Flat Bar Hot Rolled (3m)
Stainless Steel 316L Flat Bar Hot Rolled (3m) - available in a range of sizes.
Stainless Steel 316L Flat Bar Rolled Edge (3m)
Stainless Steel 316L Flat Bar Rolled Edge (3m) - available in a range of sizes.
Stainless Steel 316L Hexagon Bar (3m)
Stainless Steel 316L Hexagon Bar (3m) - available in a range of sizes.
Stainless Steel 316L Round Bar Bright Drawn (3m)
Stainless Steel 316L Round Bar Bright Drawn (3m) - available in a range of sizes.
Stainless Steel 316L Tube & Pipe (Seamless)
Stainless & aluminium can supply stainless steel 316L seamless tubing and pipe. All stainless stock can be delivered mirror polished if required. Available Ranges: - Seamless Pipe & Tube (316L)
Stainless Steel 420 Economiser
Stainless Steel 420 is a martensitic grade offering a combination of good corrosion resistance and hardness. The 'Economiser' variant is a cost-effective version ideal for applications where moderate corrosion resistance is acceptable. 420 stainless steel is commonly used for: • Cutlery and knife blades • Surgical instruments • Moulds and dies • Valve components • Shafts and pump parts This grade can be hardened by heat treatment to achieve a hardness of approximately 50 HRC.
-1200.webp)
Stainless Steel Angle — Grade 304
Grade 304 Stainless Steel Equal Angle. The most widely used austenitic grade, offering excellent corrosion resistance for structural sections, frames, supports, and brackets. Available in sizes from 20 × 20mm to 100 × 100mm in various thicknesses.
Stainless Steel Angle — Grade 316
Grade 316 Stainless Steel Equal Angle. Superior corrosion resistance with added molybdenum, ideal for marine, chemical, and food-processing environments. Available in sizes from 20 × 20mm to 100 × 100mm in various thicknesses.
Stainless Steel Billets (Round & Square)
Round and square stainless steels billets in a number of different grades including: 416, 420, F6NM, 303, 304H, 321H, 347H, 316H, 317L, 309, 310, 904L, F44, 600, 800, 800H, 800HT, F20, 825, and more on request.
Stainless Steel Box Section 430 Grade
Stainless Steel Box Section 430 Grade - available in a range of sizes.
Stainless Steel Box Section 441 Grade
Stainless Steel Box Section 441 Grade - available in a range of sizes.
Stainless Steel Box Section Grade 304
Stainless Steel Square and Rectangular Box Section. Ornamental and structural tubing with excellent corrosion resistance.
Stainless Steel Box Section Grade 304L
Stainless Steel Square and Rectangular Box Section. Ornamental and structural tubing with excellent corrosion resistance.
Stainless Steel Flat Bar Grade 304
Stainless Steel Flat Bar in grade 304. Slit rolled edge or machined from plate. Suitable for architectural and structural applications.
Stainless Steel Flat Bar Grade 316
Stainless Steel Flat Bar in grade 316. Slit rolled edge or machined from plate. Suitable for architectural and structural applications.
Stainless Steel Grade 410
Grade 410 is the basic martensitic stainless steel; like most non-stainless steels it can be hardened by a "quench-and-temper" heat treatment.
Stainless Steel Rectangular Box Section 304 Dull Polished
Stainless Steel Rectangular Box Section 304 Dull Polished - available in a range of sizes.
Stainless Steel Rectangular Box Section 304 Unpolished
Stainless Steel Rectangular Box Section 304 Unpolished - available in a range of sizes.
Stainless Steel Rectangular Box Section 316 Dull Polished
Stainless Steel Rectangular Box Section 316 Dull Polished - available in a range of sizes.
Stainless Steel Rectangular Box Section 316 Unpolished
Stainless Steel Rectangular Box Section 316 Unpolished - available in a range of sizes.
Stainless Steel Round Bar Grade 303
Grade 303 represents the optimum in machinability among the austenitic stainless steels. It is primarily used when production involves extensive machining in automatic screw machines.
Stainless Steel Sheet Grade 304 (Sheet, Plate, Tube, Mesh & Bar)
Stainless steel types 304 and 304L. Type 304 is the most widely used and versatile of the stainless steel grades. It is also known as 18/8 (18% chromium 8% nickel). It is available in a wider range of products, forms and finishes than any other of the 300 grade stainless steels. 304 has excellent forming and welding characteristics. AISI 304 stainless can be deep drawn more severely than Types 301 and 302 without immediate heat softening, a characteristic that has made this grade dominant in the manufacture of drawn stainless steel parts such as sinks, splashbacks and saucepans and other hollow-ware. Type 304 stainless steel also has outstanding welding characteristics. Post-weld annealing is not required to restore the excellent performance of this grade in a wide range of mildly corrosive conditions. Type 304L does not require post-weld annealing and finds extensive use in heavy gauge components where freedom from carbide weld precipitation is often required, including stainless steel 304 sheet. All stainless stock can be delivered mirror polished if required.
Stainless Steel Sheet Grade 316 (Sheet, Plate, Tube, Mesh & Bar)
316 Stainless Steel is commonly used for food processing equipment, and as surgical stainless steel. 316 is also know as marine grade stainless steel due to its higher resistance to chloride corrosion compared to type 304. 316L is an extra low carbon grade of 316, often found in stainless steel watches. Its resistance to chloride attack means it is often selected for use in marine atmospheres. 316Ti includes titanium for heat resistance, a typical application would be flexible chimney liners. 316 stainless steel is a molybdenum-bearing grade. This addition gives the better overall corrosion resistance properties than type 304and higher creep strength at elevated temperatures. All stainless stock can be delivered mirror polished if required, Call for details.
Stainless Steel Square Bar 304L (3m)
Stainless Steel Square Bar 304L (3m) - available in a range of sizes.
Stainless Steel Square Bar 316L (3m)
Stainless Steel Square Bar 316L (3m) - available in a range of sizes.
Stainless Steel Square Box Section 304 Dull Polished
Stainless Steel Square Box Section 304 Dull Polished - available in a range of sizes.
Stainless Steel Square Box Section 304 Unpolished
Stainless Steel Square Box Section 304 Unpolished - available in a range of sizes.
Stainless Steel Square Box Section 316 Dull Polished
Stainless Steel Square Box Section 316 Dull Polished - available in a range of sizes.
Stainless Steel Square Box Section 316 Unpolished
Stainless Steel Square Box Section 316 Unpolished - available in a range of sizes.
Structural Steel S275 (Universal Beams, Plate, Channels)
S275 is a structural grade steel with a minimum yield strength of 275 N/mm². This grade of steel, along with S275JR, is useful for many general engineering and structural jobs and comes in a variety of forms, such as a plate, flat bar, and even a round bar. Though this grade isn’t as strong of a steel as S355, it functions as a great welding metal and has good machinability. If request our company is able to flame cut a profile into a sheet of S275. S275 suitable for numerous general engineering and structural applications. S275 & S275JR steel can be supplied in many forms including plate, round bar and flat bar. S275 gives a lower strength (than S355) but has good machinability and can also be welded. The average minimum yield for S275 steel is 275 N/mm². That is why it is called S275. BS EN 10025 S275 & S275JR supercedes BS4360 43A and 43B.
Structural Steel S355 (Universal Columns, High Yield Plate)
S355 is a structural grade steel with a minimum yield strength of 355 N/mm². This grade is also available in plate, round bar, flat bar, and is even available in blocks. S355 is low in carbon option, however, has more SI in its composition. This creates a highly durable steel that is used in harsh environments that are susceptible to frequent weather changes like on offshore structural sites. And like S275, this grade can also be flame cut into a profile upon request. S355, S355JR, S355J2, S355J2+N steel in plate, round bar, flat bar and blocks. S355 steel is a low carbon steel whose specifications offer high yield strength. The average minimum yield for S355 steel is 355 N/mm² giving its name: S355. BS EN 10025 S355, S355JR, S355J2 and S355J2+N supercedes BS4360 50A, 50B, 50C 50D. S355 sheet/plate can also be flame cut to a profile on request.
Top Hat Profile
A top hat section is a versatile, economical, and lightweight product that is easy to use. These sections are highly popular for uses such as roof purlins, floor joists, fencing, carports, wall girts, and racking. Our top hat purlins provide an economical alternative to timber. We construct the profile to be easily lapped to improve ultimate performance. Our top hat sections are optimal for all commercial, industrial and construction applications. Made with the highest quality, these sections are offered in a variety of materials. Stainless and Aluminium top hat sections are manufactured through a hot dipped galvanized steel process. This provides a durable protection if this section will be used in exposed internal and moderate environments. Depending on the available transport and type of handling, you can order the length up to at least 12 metres.
Traditional and Flat Lathe
Stainless and Aluminium welds extremely strong and efficient traditional and flat lathes. Most traditional lathes are used for objects that slide shut and open, such as roller doors. Our rolled steel lathes are created with a T section profile that provides a rolled edge for the bottom of roller shutter doors. Stainless and Aluminium makes traditional and flat lathes to the highest efficiency and specification to our customer’s needs. A traditional steel lathe is designed precisely for heavy industrial doors or large storage compartments. Stainless and Aluminium crafts each section for both industrial and commercial purposes.
Tufnol Whale Brand
Tufnol® Whale® Brand is a Medium-weave Phenolic Cotton Laminate (SRBF – Synthetic Resin Bonded Fabric). It is a well rounded engineering plastic that suit many purposes. It has good properties that are high strength, good toughness and good weatherability. Whale Tufnol sheet material is produced in a similar way to plywood and, as a result, is quite rigid double that of nylon. It has many uses but as said above is a good general purpose plastic that can be used in many different applications such as gears, spacers, jigs and low voltage insulation etc.
Universal Beams – Structural Steel
Our company supply structural beams and columns to constructions and industrial builders all over the nation. From our broad range of sizes already stocked, whatever our clients are looking for we able to have delivered to their site where it may be. **What are Universal Beams and Columns** Universal Beams are long structures with an I cross section. It is a common beam type. A universal beam is very efficient at carrying bending loads that are also shear. They are used mostly in construction and are preferred in civil engineering projects. **UB and UC Dimensions and Grades** There are a variety of Universal beams and columns that can be cut and shipped directly to you. Universal beams range from 127 x 76 x 13 kg/m up to 914 x 419 x 388 kg/m. These beams can also be supplied in a couple of different grades including S275 and S355. All our beams can cut to the size you require, primed and shipped directly to you in our vehicles wherever you may be in the country. Our universal columns come in sizes ranging from 152 x 152 x 23 kg/m to 356 x 406 x 634 kg/m. Many of our columns come varying in weight per serial size to match the job it is needed for. These columns also come in different steel grades like S275 and S355. Universal Columns can also be delivered to any location in the nation by our fleet of trucks in order to make your construction job a lot simpler. Universal Beams are a common structural steel shape in construction which is why we make sure to carry a variety of sizes so that they can be delivered in a timely manner and many of our sizes can be cut to order in case a more customized size is needed for your construction project. So, if you have a construction job anywhere in the country that is in need of Universal beams, just reach out to our company to see how we can provide you with the steel you need for the job. Call today.
Universal Columns – Structural Steel
Universal columns and beams are a commonly used structural steel shape for many different construction and civil engineering projects. It is important to know which steel structure you need for the job because through universal columns and beams look the same, they are designed for different purposes and function differently under certain types of loads. **Difference between Universal Columns and Beams** A Universal column is structured to hold loads along its vertical axis and resist twisting, while universal beams are structured to hold loads along the length of the beam and are structured to resist bending from the weight of the load. Yet, both are meant to hold a lot of weight coming in from one direction. Universal columns normally have more square dimensions with a similar length and width to make the structure sturdier and less likely to twist. Neither universal columns nor beams are equipped to deal with bidirectional loads. In which case, some other structural steel shape would be better suited for the type of job you have like a HSS for example. **Universal Columns Grades and Sizes** We provide universal columns in a variety of sizes, ranging from 152 x 152 x 23 kg/m to 356 x 406 x 634 kg/m. Most of the columns we have available come in a few different weights per serial sizes. Our columns can also be supplied in a couple different steel grades including S355 and S275. All our sizes can be cut to the appropriate size for your project, primed, and shipped to you in our fleet of steel delivering vehicles. So, if you are in need of universal columns for your construction project give us a call and we can deliver any sized columns you need from our stock to your project site anywhere across the country.
W Track Section
Stainless and Aluminium supplies a variety of W track profile sections for many different applications. In fact, they are commonly used for use guiding security grill sections. You will find that our W track profiles are crafted with the highest specifications and are available in a wide selection of materials. We strive to develop the most durable and efficient W track to provide our customers with optimal support with our steel sections. A W track section is sometimes also referred to as an E section. Used for a variety of structural purposes the W track helps guide other structural units smoothly and efficiently. Commonly needed for all industrial and commercial purposes, the W track section is mostly used for garage and guiding grill sections.
Water Based Oil / Spray Mist
High-performance water-based cooling media for machining. Improves tool life and surface finish.